[. . . ] Before any transportation, your product must be packed correctly in order to avoid any damage. RETAIN INSTRUCTIONS The safety anil operating instructions should be retained for future use. HEED WARNINGS All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] All other servicing should be referred to qualified service personnel. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. CLEANING The appliance should be cleaned only as recommended by the manufacturer. POWER LINES An outdoor antenna should be located away from power lines. NON-USE PERIODS The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. OBJECT AND LIQUID ENTRY Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. ON/OFF POWER BUTTON Press this button to turn ON your appliance, power is supplied to your unit and it becomes operational, the blue meters lights. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. TUNER INPUT Press this button to select the tuner as your listen source. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. BOUTON DE VOLUME VYour amplifier used a rotary type knob to control the 2 channel output sound level (left and right). Turn this volume knob clockwise to increase the ouput sound level and turn this volume knob counterclockwise to decrease the output sound level. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. To be used with small speakers to improve sound performance in lower frequencies. [. . . ] BOOST EQ When Boost EQ is on, an electronic signal processor boost different bass frequencies in order to optimize sound results of small or bookshelf speakers. POWER CORD (C) /FUSE HOLDER (B) / VOLTAGE SELECTOR (A) You need to be sure about the voltage of your country. In case that you need to use your appliance in 115V, you need to change the position of the voltage switch and to replace the voltage fuses by those included in your product. [. . . ]